STEEL DOORS 12-09

Secco Sistemi OS2 65 EXTERNAL double or triple glazed with safety glass.

Thermal break steel windows for glazing of 40 mm, profiles of 27 mm, central section 62 mm

OS2 65 is the thermal break steel window with profiles of just 27 mm – 47 mm for the lateral section, 62 mm for the central section and depth of 65 mm. It can house insulating glazing of up to 40 mm.

OS2 65 is part of the OS2 family of profiles, studied, conceived and realized by Secco Sistemi to replace the casings used from the nineteenth century up to the middle of the last century. Utilized also in contemporary architecture for the transparency and clear-cut lines, the slender profiles of the OS2 system ‘dematerialize’ the walls and allow for greater freedom in the design of the casing.

The performance of the OS2 thermal break system has been tested by the best laboratories of European certification, as according to the current specific EN 14351-1 regulations.

System and performance

OS2 window with outward opening – a system integrated with accessories, gaskets and thermal break profiles with depth of 65 mm which consents realization of windows in a wide range of possible variations: square, rectangular, curved or shaped, with insulated glazing of up to 32 mm of thickness.
Each solution has the specific accessories, certified and integrated with the system.

OS2 outward opening door – a system fully integrated with accessories, gaskets and thermal break profiles with depth of 65 mm, allowing for a wide range of possible variations: square, rectangular, curved or shaped, with insulating glazing of up to 30 mm thickness.
Each solution is complete with specific accessories certified and integrated with the system. The sealing characteristics are guaranteed by a double internal/external rebate system and by a drop-down seal/retractable gasket under the socle.

33.1 Safety glass as standard

Safety glass 33.1 is a special type of glass that minimizes the potential health hazard for people positioned near glazing and in glass areas.
Glass is called “safe” when the production technique ensures decreased damage resulting from possible deformations, impacts or fire.

Designation 33.1 tells us to use 2 sheets of 3 mm glass and one layer of foil. Safety glass 33.1 belongs to theis labeled as a class 02 glass. It is mostly used in flats, schools and offices. The glass provides protection against injury. It can also be used in buildings in the risk of internal explosions. After a strong impact, the glass breaks, but the pieces are kept on the undamaged layer of the PVB film.

Safety glass

The degree of strength of these panes is determined by classes O1, O2 – protecting only against injury – and classes P1, P2 – more resistant to destruction and constituting a certain difficulty when trying to force them. The most popular safety glass (laminated) is made of two sheets of glass and one or two layers of PVB foil. They are marked with the appropriate codes.

Advantages of safety glass:

• Increased mechanical strength while maintaining transparency and shape after shattering;
• Refusing to break into dangerous debris;
• Resistant to the effects of force burglary;
• Resistance of bullet-proof glass to piercing with a gun;
• Improvement of acoustic insulation in combination with thermal insulation glass;
• Using PVB film, it is possible to limit ultraviolet radiation.

The use of safety glass

In the construction industry, glued glass is used for glazing windows, doors, partition walls or fanlight elements in schools, nurseries, classrooms and in environments with potential danger for explosions, like gas stations for example. Using colored foil, eg green, brown and gray, you can reduce the effects of solar radiation. For example, the construction of a glued window can consist of 2 glass panes (3 mm), glued together with two layers of foil (0.76 mm) or two glass panes (4 mm) glued together with four layers of film (0,38 mm). Bulletproof glass is created using the right combination of glass and foil.